Wednesday, June 1, 2011

Why I don't like beer blogging


I haven't posted on this thing in awhile. Why is that. I've been drinking lots of good beers. I've started to write about some of them. I even made a video or two. But every time I finish writing or recording a beer review I think about how lame beer reviewing is. There are more than several beer reviewers out there on the blog circuit and on youtube. Some are better than others. Some are boring, some are insightful, some are charismatic, and some are goobers (which can be either good or bad). Almost all, however, are formulaic. They always give a run down of 1.appearance, 2. aroma, 3.flavor, and then some overall ranking. That shit is lame. I like reading about beer. I like watching beer related videos, but really, I don't care about your personal taste or opinion. I want to experience beer for myself and I really don't need to be told which beers are good or bad. I can figure that out for myself. If you are going to post something, make it at least somewhat original. I can't tell you how many beer bloggers are out there with the same post a million times in a row with just the beer switched out. A. no one cares what you think. B. you are boring. That's why I appreciate dudes like Don Osborn, who have more to say then just the obvious: AROMA 8/10 APPEARANCE 4/5 TASTE 8/10 PALATE 3/5 OVERALL 16/20. So I'm gonna try to come up with some more original shit to put on here. But if you want straight up beer reviews, there are mad dudes out there doing that stuff. I can tell you what I like, but I doubt anyone really cares.

Friday, May 20, 2011

Velocirapture

To celebrate the impending rapture and hopefully score some points with the big guy, I picked up a Chimay Blue. Cheers.

Monday, March 28, 2011

Sunday, March 27, 2011

Experiments in General Chemistry

Yesterday Adam and I brewed an American amber ale. The previous time we brewed we had come up short on volume due to boil off (evaporation during the boil) and with too high of a gravity (basically too thick with sugars). We ended up topping off the fermentor with water to 5 gallons which corrected the gravity. The beer came out quite nice in the end. Too avoid this scenario we decided to collect a larger volume of sweet wort while lautering. We were shooting for seven and a half gallons of pre-boil wort as we normally collect seven gallons. We did not take in to account the fact that we would be distracted by the Rangers game on television. We ended up with eight gallons of sweet wort. It was all good though. We hit our target gravity just fine and we have a nice five gallon batch bubbling away in the brew closet.

This is, I'm sure, very exciting to my readership. Or probably not. But the story doesn't end there. We had some extra wort at the end of the boil. I decided to set some of it aside for a small experimental batch. I collected just under a half gallon in a JJ Bittings growler. I didn't have a specific plan for the brew, and actually nearly forgot about it as I was cleaning up after brew day. Plus there was this international friendly on between Argentina and the US which grabbed my attention after cleaning was complete. Eventually I remembered I had the growler chilling in the closet. I tried to come up with a quick plan for the beer. I remembered that we had some dried orange peel left over from a Belgian single we did some time ago. I dropped some of the orange peel into the growler. As I was searching for ingredients to add to the brew I found some Munton's dry yeast. It was over a year past it's best by date, but I said what the hell. I pitched a packet directly into the growler. I was just going to settle with this, but then I started to think about adding spices to ambers. The first brew that came to mind was Anchor's Christmas Ale. It is a seasonal favorite of mine. I headed over to the spice rack and grabbed some nutmeg and coriander. I scooped some of each into the beer and topped it off with an airlock. I probably should have done some research about the amount of spice to add to the beer, but I was kind of in a hurry. I probably over-spiced the hell out of it, but honestly I wasn't sure if the thing would even ferment given that the yeast was a year expired. Though,when I checked it this morning it was bubbling away. I'm excited to see how my little experiment comes out. I'm not sure how I'm going to bottle it, given it is such a small batch. Another experiment for another day.

Tuesday, March 1, 2011

Back with a Barleywine


Several in fact. First a note on the lack of activity on this blog. My PC was recently hacked by eastern European hackers. A lot of my personal info got out and I had to close all my bank and credit card accounts and open new ones. The hackers actually took quite a bit of money from my savings account, which investigators are still trying to get back. I ended up scrapping that PC and dropping more money then I wanted on an Imac. I'm still working on getting my finances back on track. But at least I still have some nice brews in the fridge. Like the ones pictured above.

Before Christmas I happened upon an '08 Sierra Nevada Bigfoot Barleywine at Shop Rite liquors in Westfield. I still had several '10 Bigfoots chilling in the beer cabinet so I decided to drink them back to back. I'm not the hugest fan of barleywine, but if it is done right they can be quite delish. Bigfoot is definitely my favorite of the style, but admittedly I have not had that many. Maybe 2011 can be my year of barleywines. The '10 Bigfoot had been aging for something like ten months. When I poured it, the beer still had a nice one finger off white head. The foam dissipated rather quickly but left behind some lacing. The aroma was sweet and piney, with some dark fruits and spice in there. Flavor is that of malt, spice, and fruit, with a big hop bite throughout and a dry finish. It is a medium bodied beer with light carbonation. The characteristics that define the beer are the sweet malt and the big hop bite that compliments and subdues the sweetness. The next night I drank the '08 Bigfoot. It was very similar to the '10. The first and most visual difference was that it lacked a foamy head. Beyond the difference in carbonation, the '08 was more subdued and perhaps more focused in both aroma and flavor. The hops were not as jarring in the '08. There was more malt and dark fruit flavors which is more typical of the style. Overall it was a bit smoother. I enjoyed both beers. They brought different nuances of the style to the table. The '10 had malt, but was big on hops. Hops are what distinguish the style from the olde ale style that came out of England. The '08 was smooth and malty, which are characteristics that define the style. Check out Bigfoot Barleywine if you want a big beer that has some really in your face flavors. Right now I am drinking an '11 and really enjoying it. Cheers.

Tuesday, January 18, 2011

Kegerator Build

Over the past 6 months or so I have been working on putting together a kegerator to dispense my home brews. It ended up becoming a process, with many trips to the hardware store, but I finally have fresh beer on tap in my apartment. It's pretty boss. I'm glad I finally got the thing up and running. There is nothing better then being able to pour yourself a beer straight from the tap.

As a homebrewer there are several important benefits to kegging versus bottling. Number one, cleaning, sanitizing, filling, and capping the fifty plus bottles needed for one five gallon batch of beer is a bitch. It is much easier to clean, sanitize, and fill, just one five gallon keg. Number two, carbonating takes less then half the time when kegging. Once a beer ferments fully, it kinda blows that you have to wait another two weeks while it bottle conditions before you can drink it. With kegging you get the same, often better, results in less then a week. Number three, with bottling you have a layer of yeast and sometimes sediment at the bottom of each bottle. This means, if you don't want a yeasty beer, you need to cut your pour at exactly the right moment leaving about a quarter inch of beer left in the bottle. That kinda stinks. When kegging, you can leave all that yeast and sediment behind in the fermentor. Also, it is sweet that when I know I need to call it a night soon, I can grab just a half of a beer. Also it is just cool in general to have draft beer in your apartment.

Although it took some time to complete, it really was not difficult. You could probably do the whole thing in one day if you had all the right parts and tools on hand. The fridge I used was a Sanyo 4912 mini fridge. This model is discontinued but there are still a bunch out there. Grab one while you can. I had to remove the shelves and cut out the molded shelves that are part of the door in order to make enough room for the kegs, CO2 tank, regulators, and all the tubing. Next I located the refrigeration line that runs across the top of the fridge using a method I read about online. It involved spreading a mixture of corn starch and rubbing alcohol on top of the fridge, turning it on, and then waiting to see where the mixture dried first. It drys right over the hot line, so I knew not to drill there as I didn't want to turn the fridge into a giant paper weight. Once the line was located, I drilled a hole in the top for the connection tubes using a hole saw. Then I mounted my tap tower on top. That's pretty much it.

Probably the most difficult part was an optional step that I decided to take. I constructed a fan box with a flexible tube running out of the side. The purpose of the box is to blow cold air up into the tap tower. This will keep the beer in the line cold and cut down on foam coming out of the tap. I ran the ac adapter out of the drain hole in the fridge. I used one of the plastic shelves that came with the fridge as a shelf for the CO2 canister and fan box. Everything fits inside, but it is tight and I need to arrange things just right in order to shut the door properly.

Enjoy the pictures below. Right now I have an extract IPA and an all grain pale ale on tap. Cheers.

hole for the lines with water proof insulation tape

CO2 tank with regulator and fan box on the shelf

sanitizing the lines

filling the first keg

beerforce one in all it's glory

Saturday, January 15, 2011

A white whale, the red herring, bigfoot?


A week of not drinking, no big thing. Really, more then anything, I missed the ritual. Coming home after a long day at work, nothing puts me at ease like a tasty craft beer. I drank a lot of tea that week to sub in. The week seemed to drag on too. It felt like two weeks. Sobriety, however, is not what I'd like to talk about in this blog post. No, let's talk about urban legends. A while back, someone had told me that only US beers had twist off caps and that all imports had pry off caps. This did not sit right with me. I kept checking my imports for twist offs, but I couldn't find one. Finally, after many years of searching, I found my jackalope. I got a beers of the world box for Christmas. In it was a Peruvian beer called Franca, and lo and behold, a twist off cap. Myth busted. The beer, by the way, had expired back in April. I took one sip and immediately poured it out. It tasted pilsner like, only kinda old and dull, and sweet, but not the good malty sweet. More like old corn syrup. I was kinda bummed because I had never had a beer from South America, let alone Peru. Hopefully one day I will get a good South American beer. I've read good things about Argentinean beer.